Any Ice.
Any Application.

Versatile Environmentally Responsible Cleaning. On Demand.

Industrial Cleaning, Done Right.

Dry ice cleaning continues to become the preferred method for environmental cleaning and surface preparation across an increasing number of industries. Cold Jet remains ahead of the curve with the SDI Select™ series, dry ice cleaning machines that offer the value of delicate cleaning and high-level aggression all in one frame. Designed with application variability and ever-changing industry demands in mind, the SDI Select can navigate the dry ice cleaning spectrum with ease.

Versatility on Demand

Showcasing Cold Jet's patented shaved ice technology, the SDI Select™ can clean large surfaces of thin, hard contaminants, without damaging the substrate. And when faced with heavier contaminants, simply bypass the shaving media, turn up the aggression and clean using full 3mm pellets.

Food Processing Power Generation Plastics Foundry

Any Ice. Any Application.

Cold Jet's SDI Select™ series is designed with the ability to shave any dry ice media input through patented feeder technology. The SDI Select™ opens new cleaning opportunities when you experience limited dry ice availability. Now, you can source any form of dry ice for your cleaning medium - even scrap ice, which includes the rejected and broken block, slices, nuggets and pellets, spare pieces left over after each shift, and even dry ice that has been sitting around for a week. For value-conscious end users, the ability to clean using scrap ice can greatly improve the ROI of each application.

The Power of Selection

Cold Jet's patented feeder technology creates shaved dry ice on demand, regardless of input. Simply switch to full pellet cleaning to penetrate the most difficult, thick contaminants.

  • Shave with any dry ice media
    • Standard block
    • 3mm Pellet
    • Nugget
    • Slice
    • Even scrap ice
  • Bypass for full 3mm pellet performance
  • Clean from as low as 50 cfm to save on compressed air and reduce noise levels
  • Increase pressure up to 250 PSI to clean the most stubborn contaminants

Introducing the SDI Select™ 60

Cold Jet's SDI Select™ 60 is designed to be the most simplistic, user-friendly dry ice cleaning system available today. With the ability to shave any dry ice media input through patented feeder technology, the SDI Select 60 opens new cleaning opportunities for users who experience limited dry ice availability. The SDI Select 60 can use any Aero blasting machine nozzle or accessory to suit your application's need, and can be as gentle or agressive as necessary - with blasting pressures ranging from 20 to 250 PSI - covering the widest range of applications in a single machine in the industry.

Seamless Compatibility

Choose from any Aero nozzle or accessory to maximize flexibility

Reduced Air and Noise

Clean from as low as 50 cfm to save on compressed air and reduce noise levels

Aggressive When Needed

Increase pressure up to 250 cfm to clean the most stubborn contaminants

24 x 28 x 43 in 343 lbs 0 - 6 lb / min 20 - 250 PSI 60 lbs
61 x 71 x 109 cm 156 kg 0 -2.7 kg / min 1.4 bar - 17.2 bar 27.2 kg

Backed by World-wide technical service.

Our quick-response world-wide support helps you solve your problems fast, no matter where you are. Our support staff are experienced Cold Jet machine operators and technicians - nothing is outsourced.