Nozzle Accessories

Allow your dry ice blasting system to meet all your blasting needs with the proper nozzle accessories. Cold Jet's nozzles can be properly outfitted to ensure optimal performance with handles, extension tubes, stingers and a much more.


Nozzle Accessories

Rotary Union 3/4 in (1.9 cm) JIC

¾" (1.9 cm) JIC Rotary Union

Full rotation when nozzle is attached to blast hose, extension tube, or nozzle.


Alpha Series Adapter - 2E0295

Alpha Series Adapter

Permits all nozzles to be used with the flange style 1" (2.54 cm) OD nozzle extension tube.


Alpha Series Coupler - 3E0729

Alpha Series Coupler

Allow Low Flow Tight Access nozzles to be used with the Single Hose Applicators.


Adjustable Clamp Style Nozzle Handle

Clamp-Style Nozzle Handle

Allows for easier maneuverability of nozzles while blasting.


Nozzle Deflector Plate 1 in. (2.54 cm)

Deflector Plate 1" (2.5 cm) width

Attached over blast end of nozzle to break up pellets.


Nozzle Deflector Plate 2 in. (5.08 cm)

Deflector Plate 2" (5.1 cm) width

Attaches over blast end of nozzle to break up pellets.


Deflector Plate 3 in

Deflector Plate 3" (7.6 cm) width

Attaches over blast end of nozzle to break up pellets.


Dual Trigger Interconnect Box

Dual Trigger Interconnect Box

Splits one blast hose into two blast hoses for simultaneous blasting.


Nozzle Extension Tube Flange Style 1 in. (2.54 cm) OD

Flange Nozzle Ext. Tube w/coupler

1" (2.5 cm) OD - used to extend nozzle with min. pressure loss.


Nozzle Extension Tube Flange Style 1 in. (2.54 cm) OD

Flange Nozzle Extension Tube

1" (2.5 cm) OD - used to extend nozzles with minimum pressure loss.


Flow Divider

Flow Divider - 1½" (3.8 cm) Hose

Splits one blast hose into two blast hoses for simultaneous blasting.


Flow Divider

Flow Divider - 1¼" (3.2 cm) Hose

Splits one blast hose into two blast hoses for simultaneous blasting.


JIC Modular End Nozzle Fittings

JIC Modular End Fitting 1" (2.5 cm)

Allow nozzle base, ext. tube, or rotary union to connect to blast hose.


JIC Modular End Nozzle Fittings

JIC Modular End Fitting ¾" (1.9 cm)

Allow nozzle base, ext. tube, or rotary union to connect to blast hose.


Quick Change Module - 3/4 in (1.9 cm) JICF 2E0360

JICF Quick Change Module

This quick change module allows for quick and safe nozzle changes.


Nozzle Base

Nozzle Base

Provide extension for nozzles in a 180° orientation beyond the exit of the blast applicator.


Nozzle bent entry tube 3/4 in (1.9 cm) OD

Nozzle Bent Entry Tube

1" (2.5 cm) OD, 80° angle - used to turn nozzle with minimum pressure loss.


1 in (2.54 cm) OD Nozzle Bent Entry Tube with Extension

Nozzle Bent Entry w/11" (29 cm) Ext.

1" (2.5 cm) OD, 80° angle - used to turn nozzle with minimum pressure loss


Nozzle Case

Nozzle Case

Made of durable material in order to store and protect nozzles.


Nozzle Extension Tube 3/4 in (1.9 cm) OD

Nozzle Extension Tube

¾" (1.9 cm) OD threaded extension tube used to extend nozzle from the applicator.


D-Series Stinger MF-125

Stinger 100 - 125 psi (6.9 - 8.6 bar)

Medium flow. Minimum flow rate of 225 SCFM (6.4 m³/min) required.


D-Series Stinger LF-125

Stinger 100 - 125 psi (6.9 - 8.6 bar)

Low flow. Minimum flow rate of 160 SCFM (4.5 m³/min) required.


D-Series Stinger HF-125

Stinger 100 - 125 psi (6.9 - 8.6 bar)

High Flow. Minimum flow rate of 240 SCFM (6.8 m³/min) required.


D-Series Stinger HF-50

Stinger 25 - 50 psi (1.7 - 3.4 bar)

High flow. Minimum flow rate of 125 SCFM (3.5 m³/min) required.


D-Series Stinger MF-50

Stinger 25 - 50 psi (1.7 - 3.4 bar)

Medium flow. Minimum flow rate of 120 SCFM (3.4 m³/min) required.


D-Series Stinger LF-50

Stinger 25 - 50 psi (1.7 - 3.4 bar)

Low flow. Minimum flow rate of 70 SCFM (2.0 m³/min) required.


D-Series Stinger MF-85

Stinger 50 - 100 psi (3.4 - 6.9 bar)

Medium flow. Minimum flow rate of 150 SCFM (4.3 m³/min) required.


D-Series Stinger LF-85

Stinger 50 - 100 psi (3.4 - 6.9 bar)

Low flow. Minimum flow rate of 110 SCFM (3.1 m³/min) required.


D-Series Stinger HF-85

Stinger 50 - 100 psi (3.4 - 6.9 bar)

High Flow. Minimum flow rate of 195 SCFM (5.5 m³/min) required.


Threaded Nozzle Handle

Threaded Nozzle Handle

Allows for easier maneuverability of nozzles while blasting.


Adjustable Tube Nozzle Handle

Tube Handle - ¾" (1.9 cm) OD

Slide easily and rotate around nozzle and ext. tube for optimal control.


Adjustable Tube Nozzle Handle

Tube Handle - 1 ¼" (3.175 cm) OD

Slide easily and rotate around nozzle and ext. tube for optimal control.


Adjustable Tube Nozzle Handle

Tube Handle - 1 3/16" (3 cm) OD

Slide easily and rotate around nozzle and ext. tube for optimal control.


Adjustable Tube Nozzle Handle

Tube Handle - 1" (2.5 cm) OD

Slide easily and rotate around nozzle and ext. tube for optimal control.